Lan Setup - NETGEAR CENTRIA WNDR4700 User Manual

Centria
Hide thumbs Also See for CENTRIA WNDR4700:
Table of Contents

Advertisement

Table 3. Common MTU sizes (Continued)
MTU
Application
1460
Usable by AOL if you do not have large email attachments..
1436
Used in PPTP environments or with VPN.
1400
Maximum size for AOL DSL.
576
Typical value to connect to dial-up ISPs.
To change the MTU size:
Select Advanced > Setup > WAN Setup.
1.
In the MTU Size field, enter a value from 64 to 1500.
2.
Click Apply to save the settings.
3.

LAN Setup

The LAN Setup screen allows configuration of LAN IP services such as Dynamic Host
Configuration Protocol (DHCP) and Routing Information Protocol (RIP).
The router is shipped preconfigured to use private IP addresses on the LAN side and to act
as a DHCP server. The router's default LAN IP configuration is:
LAN IP address. 192.168.1.1
Subnet mask. 255.255.255.0
These addresses are part of the designated private address range for use in private networks
and are suitable for most applications. If your network requires a different IP addressing
scheme, you can change these settings in the LAN Setup screen.
To change the LAN settings:
If you change the LAN IP address of the router, you are
Note:
disconnected. To use the router menus, you must use a browser to
connect to the new IP address and log in again.
CENTRIA WNDR4700/WNDR4720
NETGEAR genie Advanced Home
45

Advertisement

Table of Contents
loading

This manual is also suitable for:

Centria wndr4720

Table of Contents