Requirements For Optional Usb Devices - NETGEAR CENTRIA WNDR4700 User Manual

Requirements for Optional USB Devices

The router works with USB 3.0 (USB Super Speed), 2.0 (USB High Speed), and 1.0 and 1.1
(USB Full Speed) standards. The approximate USB bus speeds are shown in the following
table. Actual bus speeds can vary, depending on the CPU speed, memory, speed of the
network, and other variables.
Table 2. USB drive speeds
Bus
USB 3.0
USB 2.0
USB 1.1
The router works with most USB-compliant external flash and hard drives. For the most
up-to-date list of USB drives that the router supports, go to:
http://kbserver.netgear.com/readyshare
The router supports both read and write for FAT16, FAT32, NTFS, Linux file systems (EXT2,
EXT3, EXT4), HFS+ (Hierarchical File System Plus), HFS+ journaled system.
Some USB external hard drives and flash drives require you to load
Note:
the drivers onto the computer before the computer can access the
USB device. Such USB devices do not work with the router.
CENTRIA WNDR4700/WNDR4720
Speed/Sec
5,000 Mbits
480 Mbits
12 Mbits
Hardware Setup
19