Use Netgear Genie After Installation; Upgrade The Firmware - NETGEAR CENTRIA WNDR4700 User Manual

Use NETGEAR genie after Installation

When you first set up your router, NETGEAR genie automatically starts when you launch an
Internet browser on a computer that is connected to the router. You can use NETGEAR genie
again if you want to view or change settings for the router.
Launch your browser from a computer or wireless device that is connected to the router.
1.
Enter http://www.routerlogin.net in the web browser address bar.
2.
A login window displays.
Enter admin for the router user name and password for the router password, both in
3.
lowercase letters.
Note: The router user name and password are different from the user name
and password for logging in to your Internet connection. See
and Access

Upgrade the Firmware

When you set up your router and are connected to the Internet, the router automatically
checks for you to see if newer firmware is available. If it is, a message is displayed on the top
of the screen. See
about upgrading firmware.
Click the message when it shows up, and click Yes to upgrade the router with the latest
firmware. After the upgrade, the router restarts automatically.
CAUTION:
Do not try to go online, turn off the router, shut down the computer, or do
anything else to the router until the router finishes restarting and the Power
LED has stopped blinking for several seconds.
CENTRIA WNDR4700/WNDR4720
admin
********
on page 21 for more information.
Upgrade the Modem Router Firmware
Getting Started with NETGEAR genie
on page 82 for more information
22
Types of Logins