Control Center Configuration; Usb Printer - NETGEAR CENTRIA WNDR4700 User Manual

Control Center Configuration

Select Tools > Configuration to display the following screen:
Automatically execute when logging on Windows. Enable this utility to start automatically
when you are logged in to Windows.
Timeout. Specify the time-out value for holding the USB resource when it is not in use.
Language. Select the display language for this utility.

USB Printer

The first time you use a printer, click Connect. You might be asked to install the driver for this
printer. After the driver is installed, the printer status changes to Available.
Some USB printers (for example: HP and Lexmark printers) request
Note:
that you do not connect the USB cable until their installation
software prompts you to do so.
If the USB printer is detected and connected automatically, you need to disconnect the
printer, and then wait for the prompt asking you to click Connect.
CENTRIA WNDR4700/WNDR4720
ReadySHARE Printer
81