If you are installing a 0.75-inch-thick HDD (this is uncommon), insert the tray into the router.
3.
Follow the THIS SIDE UP and the BACK OF PRODUCT signs on the tray to place it in the
correct orientation.
Insert the HDD.
4.
Close the latch to secure the HDD in place.
5.
Close the side door.
6.
If the latch is not in the correct position or the HDD is inserted in the
Note:
wrong direction, then the side door to the router cannot be closed.
When you turn on the router, the HDD LED shows the status of the HDD.
Solid green. The internal HDD is working and is not full.
•
Solid green plus red. The HDD is 85% full.
•
Solid red. The HDD is not formatted, the HDD connection is loose, or there is a failure
•
alert.
Off. No internal HDD is connected.
•
CENTRIA WNDR4700/WNDR4720
The metal connector on the HDD is up.
Hardware Setup
16