Select Advanced > Advanced Setup > Wireless Repeating Function to display the
2.
Wireless Repeating Function screen.
Select the Enable Wireless Repeating Function check box and select the Wireless Base
3.
Station radio button.
Enter the MAC address for one or more repeater units.
4.
Click Apply to save your changes.
5.
Set Up a Repeater Unit
Use a wired Ethernet connection to set up the repeater unit to avoid conflicts with the wireless
connection to the base station.
If you are using the WNDR4700/WNDR4720 base station with a
Note:
non-NETGEAR router as the repeater, you might need to change
additional configuration settings. In particular, you should disable the
DHCP server function on the wireless repeater AP.
To configure the router as a repeater unit:
Log in to the router that will be the repeater.
1.
Select Basic > Wireless Settings and verify that the wireless settings match the base unit
2.
exactly. The wireless security option must be set to None or WEP.
Select Advanced > Wireless Repeating Function, and select the Enable Wireless
3.
Repeating Function check box and the Wireless Repeater radio button.
CENTRIA WNDR4700/WNDR4720
Advanced Settings
106
Scroll to view
more settings