Hdd Format; Remove A Hard Disk Drive - NETGEAR CENTRIA WNDR4700 User Manual

Centria
Hide thumbs Also See for CENTRIA WNDR4700:
Table of Contents

Advertisement

HDD Format

If you install an HDD during your initial router setup, the router detects it. A preformatted HDD
does not have to be reformatted. If the HDD has not yet been formatted, you are prompted to
format the HDD.
CAUTION:
Formatting the hard disks erases any data stored on it.
You can follow the prompts to do so, or wait until later and log in to the router to format the
HDD from the router menu. See

Remove a Hard Disk Drive

CAUTION:
To protect your equipment, always turn off the router before removing or
inserting a hard disk drive (HDD).
To remove the hard disk drive (HDD):
Power off the router with the Power On/Off button.
1.
Open the router side door and release the internal latch as shown.
2.
CENTRIA WNDR4700/WNDR4720
on page 73.
Format the HDD
Hardware Setup
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Centria wndr4720

Table of Contents