Table of Contents
Advertisement
-
If you want all client traffic to go through the other access point (repeater with wireless
client association), leave this check box cleared.
•
Wireless MAC of this router. This field displays the MAC address for your WiFi modem
router for your reference. You need to enter this MAC address in the corresponding
Wireless Repeating Function screen of the other access point you are using.
•
Wireless Repeater. If your WiFi modem router is the repeater, select this radio button.
Repeater IP Address. If your WiFi modem router is the repeater, enter the IP address of
the other access point.
Base Station MAC Address. If your WiFi modem router is the repeater, enter the MAC
address for the access point that is the base station.
•
Wireless Base Station. If your WiFi modem router is the base station, select this radio
button.
Disable Wireless Client Association. If your WiFi modem router is the base station,
selecting this check box means that wireless clients cannot associate with it. Only LAN
client associations are allowed.
Repeater MAC Address (1 through 4). If your WiFi modem router is the base station, it
can act as the "parent" of up to four other access points. Enter the MAC addresses of the
other access points in these fields.
Set Up the Base Station
The wireless repeating function works only in hub and spoke mode. The units cannot be
daisy-chained. You have to know the wireless settings for both units. You have to know the
MAC address of the remote unit. First, set up the base station, and then set up the repeater.
To set up the base station:
1.
Set up both units with the same wireless settings (SSID, mode, channel, and security).
The wireless security option has to be set to None or WEP.
2.
Select ADVANCED > Advanced Setup > Wireless Repeating Function to display the
Wireless Repeating Function screen.
3.
Depending on the frequency you want to use, select the Enable Wireless Repeating
Function check box and select the Wireless Base Station radio button.
4.
Enter the MAC address for one or more repeater units.
5.
Click Apply to save your changes.
Set Up a Repeater Unit
Use a wired Ethernet connection to set up the repeater unit to avoid conflicts with the
wireless connection to the base station.
D6300 WiFi DSL Modem Router
Advanced Settings
101
Hide quick links:
Advertisement
Table of Contents
