Guest Networks - NETGEAR D6300 User Manual

Guest Networks

Adding a guest network allows visitors at your home to use the Internet without using your
wireless security key. You can add a guest network to each wireless network: 2.4 GHz b/g/n
and 5.0 GHz a/n.

To set up a guest network:
1. From the BASIC Home screen, select Guest Network to display the following screen:
2. Select any of the following wireless settings:
Note: These settings apply separately to the 2.4-GHz b/g/n and 5-GHz a/n
bands.
Enable Guest Network. When this check box is selected, the guest network is enabled,
and guests can connect to your network using the SSID of this profile.
Enable Wireless Isolation. If this check box is selected, then wireless clients (computers
or wireless devices) that join the network can use the Internet, but cannot access each
other or access Ethernet devices on the network.
Enable SSID Broadcast. If this check box is selected, the wireless access point
broadcasts its name (SSID) to all wireless stations. Stations with no SSID can adopt the
correct SSID for connections to this access point.
Allow guest to access My Local Network. If this check box is selected, any user who
connects to this SSID has access to your local network, not just Internet access.
3. Give the guest network a name.
D6300 WiFi DSL Modem Router
NETGEAR genie BASIC Settings
40