NETGEAR D6300 User Manual page 15

Table 1. Power On/Off LED
Icon LED Activity
Solid green
Solid red
Off
Restore Factory
Settings
Table 2. DSL LED
Icon LED Activity
Solid green
Blinking green
Off
Table 3. Internet LED
Icon LED Activity
Solid green
Solid red
Blinking green
Off
D6300 WiFi DSL Modem Router
Description
Power is supplied to the router.
POST (power-on self-test) failure or a device malfunction has occurred.
Power is not supplied to the router.
LED blinks momentarily when the Restore Factory Settings button on the
bottom of the unit is pressed for 6 seconds. The Power LED then blinks red
three times when the Restore Factory Settings button is released and then
turns green as the gateway resets to the factory defaults.
Description
You have an ADSL connection. In technical terms, the ADSL port is
synchronized with an ISP's network-access device.
Indicates that the WiFi modem router is negotiating the best possible
speed on the ADSL line.
The unit is off or there is no ADSL connection.
Description
You have an Internet connection. If this connection is dropped due to an
idle time-out but the connection is still present, the LED stays green. If the
Internet connection is dropped for any other reason, the LED turns off.
The Internet (IP) connection failed. See
page 124 for troubleshooting information.
Data is being transmitted over the Internet connection.
No Internet connection is detected or the device is in bridge mode (an
external device handles the ISP connection).
Hardware Setup
15
Cannot Access the Internet on