Appendix A Supplemental Information; Factory Settings - NETGEAR D6300 User Manual

Supplemental Information
A.
Factor y set t i n gs a nd te ch n ic a l s p e ci ficat ion s
This appendix provides factory default settings and technical specifications for the D6300 WiFi
DSL Modem Router.

Factory Settings

You can return the WiFi modem router to its factory settings. Use the end of a paper clip or
some other similar object to press and hold the Restore Factory Settings button on the
back of the router for at least 5 seconds. The WiFi modem router resets and returns to the
factory settings. Your device returns to the factory configuration settings shown in the
following table.
Table 11. Factory default settings
Feature
Router login
Internet
connection
Local network
(LAN)
User login URL
User name (case-sensitive)
Login password (case-sensitive)
WAN MAC address
WAN MTU size
Port speed
LAN IP
Subnet mask
DHCP server
DHCP range
Allow a registrar to configure this
router
DHCP starting IP address
DHCP ending IP address
Default Behavior
www.routerlogin.com or www.routerlogin.net
admin
password
Use default hardware address
1500
Autosensing
192.168.0.1
255.255.255.0
Enabled
192.168.0.2 to 192.168.0.254
Enabled
192.168.0.2
192.168.0.254
131
A