Remote Management - NETGEAR D6300 User Manual

Wifi dsl modem router
Hide thumbs Also See for D6300:
Table of Contents

Advertisement

Remote Management

The remote management feature lets you upgrade or check the status of your WiFi DSL
Modem Router over the Internet.
To set up remote management:
1.
Select ADVANCED > Advanced Setup > Remote Management.
Note:
Be sure to change the WiFi modem router's default login password to a
very secure password. The ideal password should contain no dictionary words
from any language and contain uppercase and lowercase letters, numbers,
and symbols. It can be up to 30 characters.
2.
Select the Turn Remote Management On check box.
3.
Under Allow Remote Access By, specify the external IP addresses to be allowed to access
the WiFi modem router's remote web management interface.
Note:
For enhanced security, restrict access to as few external IP addresses
as practical.
To allow access from a single IP address on the Internet, select Only This Computer.
Enter the IP address that is allowed access.
To allow access from a range of IP addresses on the Internet, select IP Address
Range. Enter a beginning and ending IP address to define the allowed range.
To allow access from any IP address on the Internet, select Everyone.
4.
Specify the port number for accessing the web management interface.
D6300 WiFi DSL Modem Router
Advanced Settings
115

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents