•
To use the PIN method, select the PIN Number radio button, enter the client security
PIN, and click Next.
Within 2 minutes, go to the client device and use its WPS software to join the network
without entering a password.
The WiFi modem router attempts to add the WPS-capable device. The WPS LED
the top of the WiFi modem router blinks green. When the WiFi modem router establishes
a WPS connection, the LED is solid green, and the WiFi modem router WPS screen
displays a confirmation message.
4.
Repeat Step 2 and Step 3 to add another WPS client to your network.
Setup Menu
Select ADVANCED > Setup to display the Setup menu. The following selections are
available:
•
Internet Setup. This selection is a shortcut to the same Internet Basic Settings screen
that you can access from the dashboard on the BASIC Home screen. See
Settings
on page 30.
•
ADSL Setup. Internet (ADSL) setup. See
•
Wireless Setup. This selection is a shortcut to the same Wireless Settings screen that
you can access from the dashboard on the BASIC Home screen. See
Settings
on page 37.
•
WAN Setup. Internet (WAN) setup. See
•
LAN Setup. Local area network (LAN) setup. See
•
QoS Setup. Quality of Service (QoS) setup. See
•
Guest Network. This selection is a shortcut to the same Wireless Settings (for guest
networks) screen that you can access from the dashboard on the BASIC Home screen.
See
Guest Networks
D6300 WiFi DSL Modem Router
ADSL Setup
WAN Setup
on page 40.
NETGEAR genie ADVANCED Home
48
on page 49.
Basic Wireless
on page 50.
LAN Setup
on page 53.
Quality of Service Setup
on
Internet Basic
on page 56.