Cable Your Router - NETGEAR WNR3500Lv2 User Manual

Cable Your Router

The installation guide that came in the box has a cabling diagram on the first page. This
section walks you through cabling with detailed illustrations.
1.
Connect the router, the computer, and the modem.
2.
Turn off and unplug the modem. If your modem has a backup battery, remove it as well.
3.
Locate the Ethernet cable (1) that connects your computer to the modem.
4.
Disconnect the cable from the modem (2). You will connect it to the router later.
5.
Locate the Ethernet cable that came with the NETGEAR product. Securely insert that
Ethernet cable into your modem and into the Internet port of the router.
N300 Wireless Gigabit Router WNR3500Lv2
1
2
Hardware Setup
13