Safely Remove A Usb Drive; Specify Approved Usb Devices - NETGEAR WNR3500Lv2 User Manual

Available Network Folders
You might need to scroll down to view this section of the screen:
• Share Name. If only 1 device is connected, the default share name is USB_Storage. You
can click the name shown, or you can type it in the address field of your web browser. If
Not Shared is shown, the default share has been deleted, and no other share for the root
folder exists. Click the link to change this setting.
• Read/Write Access. Shows the permissions and access controls on the network folder:
All - no password (the default) allows all users to access the network folder. The
password for admin is the same one that you use to log in to the router.
• Folder Name. Full path used by the network folder.
• Volume Name. Volume name from the storage device (either USB drive or HDD).
• Total/Free Space. Shows the current utilization of the storage device.

Safely Remove a USB Drive

To safely remove a USB disk drive so that no users can access it, select USB Storage >
Basic Settings, and click the Safely Remove USB Device button. This takes the drive
offline.

Specify Approved USB Devices

For more security, you can set up the router to share approved USB devices only. You can
access this feature from the Advanced Setup menu on the Advanced tab.
N300 Wireless Gigabit Router WNR3500Lv2
USB Storage
52