NETGEAR WNR3500Lv2 User Manual page 53

To set up approved USB devices:

1. Select Advanced > Advanced Setup > USB Settings. Th e following screen
displays:
2. Click the Approved Devices button. The USB Drive Approved Devices screen displays:
This screen shows the approved USB devices and the available USB devices. You can
remove or add approved USB devices.
3.
To add an approved USB device, select it from the Available USB Devices list, and then click
Add.
4. Select the Allow only approved devices check box.
5. Click Apply so that your change takes effect.
If you want to work with another USB device, you have to first click the Safely Remove USB
Device button for the currently connected USB device. Connect the other USB device, and
repeat this process.
N300 Wireless Gigabit Router WNR3500Lv2
USB Storage
53