Upgrade Router Firmware - NETGEAR WNR3500Lv2 User Manual

1.
Launch your browser from a computer or wireless device that is connected to the router.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
The login window displays:
3. Enter admin for the router user name and password for the router password, both in
lowercase letters.
Note: The router user name and password are different from the user name
and password for logging in to your Internet connection. See
and Access

Upgrade Router Firmware

When you set up your router and are connected to the Internet, the router automatically
checks for you to see if a newer firmware is available. If it is, a
of the screen . See
Upgrade the Router Firmware
upgrading firmware.
Click the message when it shows up, and click Yes to upgrade the router with the latest
firmware. After the upgrade, the router restarts.
CAUTION:
Do not try to go online, turn off the router, shut down the computer, or do
anything else to the router until the router finishes restarting and the Power
LED has stopped blinking and has turned to steady green for several
seconds.
N300 Wireless Gigabit Router WNR3500Lv2
admin
********
on page 16 for more information.
Getting Started with NETGEAR Genie
message is displayed on the top
on page 62 for more information about
18
Types of Logins