Factory Settings - NETGEAR WNR3500Lv2 User Manual

Supplemental Information
A.
This appendix provides factory default settings and technical specifications for the N300
Wireless Gigabit Router WNR3500Lv2.

Factory Settings

You can return the router to its factory settings. Use the end of a paper clip or some other
similar object to press and hold the Restore Factory Settings
router for at least 7 seconds. The router resets, and returns to the factory settings. Your
device returns to the factory configuration settings shown in the following table.
Table 4. Factory default settings
Feature
Router login
Internet
connection
Local network
(LAN)
User login URL
User name (case-sensitive)
Login password (case-sensitive)
WAN MAC address
WAN MTU size
Port speed
LAN IP
Subnet mask
DHCP server
DHCP range
Time zone
Time zone daylight saving time
Allow a registrar to configure this
router
Default behavior
www.routerlogin.com or www.routerlogin.net
admin
password
Use default hardware address
1500
Autosensing
192.168.1.1
255.255.255.0
Enabled
192.168.1.2 to 192.168.1.254
United States is Pacific time, otherwise, varies by region
Disabled
Enabled
103
A
button on the bottom of the