Printing Problems - Dell 2335dn Multifunctional Laser Printer User Manual

Transparencies stick
together in the paper exit.
Envelopes skew or
fail to feed correctly.

Printing Problems

Condition
The printer
does not print. receiving power.
selected as the default
printer.
the following:
between the computer and
the printer is not
connected properly.
between the computer and
the printer is defective.
configured incorrectly.
may be incorrectly
installed.
malfunctioning.
Use only the transparencies specifically designed for a
laser printer. Remove each transparency as it exits from the
printer.
Ensure that the paper guides are against both sides of the
envelopes.
Possible cause
The printer is not
Check the power switch and the power
source.
The printer is not
default printer in your Windows.
Printers. Right-click the Dell 2335dn MFP
printer icon and select Set as Default
Printer.
Check the printer for
your service representative.
The connection cable
reconnect it.
The connection cable
computer that is working properly and print a
job. You can also try using a different printer
cable.
The printer may be
that all of the print settings are correct.
The printer driver
reinstall it; see
"Installing Software in Microsoft® Windows®
Operating System"
The printer is
operator panel to see if the printer is
indicating a system error.
Suggested solutions
Check the power cord connections.
Select Dell 2335dn MFP as your
Click the Start button Settings
The front or rear door is not
closed.
Paper is jammed.
No paper is loaded.
The toner cartridge is not
installed.
If a printer system error occurs, contact
Disconnect the printer cable and
If possible, attach the cable to another
Check the printer properties to ensure
Remove the printer driver and then
"Uninstalling Software"
respectively.
Check the display message on the
and