Original Size; Original Type; Using Special Copy Features - Dell 2335dn Multifunctional Laser Printer User Manual

1.
2. Press Scroll ( or
3. Press Scroll ( or

Original Size

You can set the size of a copied image, when you copy original documents from the documents glass or the
DADF.
1. Press Scroll ( or
2. Press Scroll ( or
3. Press Scroll ( or

Original Type

The original type setting is used to improve the image quality by selecting the document type for the current
copy job.
1. Press Scroll ( or
2. Press Scroll ( or
3. Press Scroll ( or
Text: Use for documents with fine details, such as fine text.
Text&Photo: Use for documents with both text and photo/gray tones.
Photo: Use for documents with photo or gray tones.

Using Special Copy Features

NOTE: Some features may not be available depending on where you loaded the document, on the
document glass or in the DADF.
NOTE: The menu items of Collation, 2 up, and 4 up may be available only when you loaded the
document in the DADF.
You can use the following copy features using the Layout menu:
Off: Prints in normal mode.
ID Copy: Prints a 2-sided original document onto one sheet of paper. See
Auto Fit: Automatically reduces or enlarges the original image to fit on the paper currently loaded in
) to highlight Contrast and then press Select (
) to adjust the contrast and then press Select (
) to highlight Copy and then press Select (
) to highlight Original Size and then press Select (
) to select the original size and then press Select (
) to highlight Copy and then press Select (
) to highlight Original Type and then press Select (
) to select the image quality mode and then press Select (
).
).
).
).
).
).
).
).
"ID Copying".