Scanning And Sending An Email - Dell 2335dn Multifunctional Laser Printer User Manual

Option
Email
Alert Setup Address or
Host Name
SMTP Gateway
Primary SMTP
Auth
SMTP Account
Name
SMTP Account
Password
From
Timeout
Address
Email
Alert Setup 1 ~ 2
Alerts for List 1
Alerts for List 2

Scanning and Sending an Email

1. Ensure that your printer is connected to a network.
2. Load the document(s) face up with top edge in first into the DADF.
OR
Place a single document face down on the document glass.
For details about loading a document, see "Loading an Original Document" .
3. Press Scroll ( or
4.
IP Sets the IP address or Host name.
Primary Sets the primary SMTP gateway.
Enable Specifies the authentication method for outgoing
e-mail.
Primary Specifies the SMTP login user. Up to 63
alphanumeric characters, periods, hyphens, under bars,
and at symbols (@) can be used. If specifying more
than one address, separate them using commas.
Primary Specifies the SMTP account password up to 31
alphanumeric characters.
Primary Sender's e-mail address registered in the Primary
server.
SMTP Sets the timeout period from 30 to 120 seconds.
Reply Designates the reply e-mail address sent with
each E-mail Alert.
Email List Sets acceptable e-mail addresses for the E-Mail
Alert feature up to 255 alphanumeric characters.
Select Supply Alert : Select the check box to
receive an E-Mail Alert for consumables.
Paper Handling Alert : Select the check
box to receive an E-Mail Alert for paper handling.
Select Supply Alert : Select the check box to
receive an E-Mail Alert for consumables.
Paper Handling Alert : Select the check
box to receive an E-Mail Alert for paper handling.
) to highlight Scan and then press Select (
Description
).