Table of Contents
Advertisement
1.
If the printer driver CD does not automatically run, click the
When the Terminal screen appears, type in:
[root@localhost root]#mount -t iso9660 /dev/hdc /mnt/cdrom
[root@localhost root]#cd /mnt/cdrom/Linux
[root@localhost root]#./install.sh
If you still failed to run the CD-ROM, type the followings in sequence:
[root@localhost root]#umount/dev/hdc
[root@localhost root]#mount -t iso9660 /dev/hdc /mnt/cdrom
NOTE:
The installation program runs automatically if you have an autorun software package installed
and configured.
2.
Click Install.
3.
When the welcome screen appears, click Next.
4.
Installation is started. When the installation is almost complete, the Add printer wizard appears
automatically. Click Next.
icon at the bottom of the desktop.
Advertisement
Table of Contents
Troubleshooting
