Scanner Lamp Power Save Mode - Dell 2335dn Multifunctional Laser Printer User Manual

Daylight Savings Time and to Standard time.
1. Press Scroll ( or
2. Press Scroll ( or
3. Press Scroll ( or
4. Press Scroll ( or
5. Enter Start Date and then press Select (
6. Enter End Date and then press Select (
7. Press Cancel (

Scanner Lamp Power Save Mode

The scan lamp under the document glass automatically turns off when it is not in actual use after a preset
period to reduce power consumption and extend the lamp life. The lamp automatically turns on and the
warm-up cycle begins whenever any key is pressed or the DADF cover is opened or a document is detected
in the DADF.
You can set the duration for which the scan lamp waits after a scan job is completed before it switches to the
Power Save mode.
1. Press Scroll ( or
2. Press Scroll ( or
3. Press Scroll ( or
4. Press Scroll ( or
The available time options are 30, 60, and 120 (minutes).
5. Press Select (
6. Press Cancel (
) to highlight Setup and then press Select (
) to highlight Machine Setup and then press Select (
) to highlight Day Light Saving and then press Select (
) to highlight Manual and then press Select (
) to return to the Standby mode.
) to highlight Setup and then press Select (
) to highlight Machine Setup and then press Select (
) to highlight Scan Power Save and then press Select (
) to display the time settings you want.
) to save the selection.
) to return to the Standby mode.
).
).
).
).
).
).
).
).
).