Swing Over Bed......................................................................................................................................... 12 in.

Distance Between Centers........................................................................................................................ 36 in.

Swing Over Cross Slide............................................................................................................................... 7 in.

Swing Over Saddle.......................................................................................................................... 11-11/32 in.

Swing Over Gap........................................................................................................................................ 17 in.

Maximum Tool Bit Size............................................................................................................................. 5/8 in.

Compound Travel.................................................................................................................................. 3-1/4 in.

Carriage Travel.................................................................................................................................... 30-1/2 in.

Cross Slide Travel............................................................................................................................... 5-5/16 in.

Headstock Info

Spindle Bore........................................................................................................................................... 1.57 in.

Spindle Taper............................................................................................................................................ MT#5

Number of Spindle Speeds............................................................................................................................... 9

Spindle Speeds......................................................................................................................... 60 – 1500 RPM

Spindle Type................................................................................................................................ D1-5 Camlock

Spindle Bearings................................................................................................ High-Precision Tapered Roller

Spindle Length........................................................................................................................................... 17 in.

Spindle Length with 3-Jaw Chuck....................................................................................................... 21-3/4 in.

Spindle Length with 4-Jaw Chuck....................................................................................................... 21-1/4 in.

Spindle Length with Faceplate............................................................................................................ 18-1/2 in.

Tailstock Info

Tailstock Quill Travel............................................................................................................................. 3-3/4 in.

Tailstock Taper.......................................................................................................................................... MT#3

Tailstock Barrel Diameter..................................................................................................................... 1.575 in.

Threading Info

Number of Longitudinal Feeds....................................................................................................................... 32

Range of Longitudinal Feeds........................................................................................ 0.0020 – 0.0548 in./rev.

Number of Cross Feeds................................................................................................................................. 32

Range of Cross Feeds................................................................................................... 0.0007 – 0.0187 in./rev

Number of Inch Threads................................................................................................................................. 34

Range of Inch Threads...................................................................................................................... 4 – 56 TPI

Number of Metric Threads.............................................................................................................................. 26

Range of Metric Threads............................................................................................................... 0.4 – 7.0 mm

Dimensions

Bed Width............................................................................................................................................. 7.126 in.

Leadscrew Diameter................................................................................................................................. 7/8 in.

Leadscrew TPI........................................................................................................................................... 8 TPI

Leadscrew Length............................................................................................................................... 46-3/4 in.

Steady Rest Capacity................................................................................................................. 3/16 – 1-1/2 in.

Follow Rest Capacity....................................................................................................................... 1/4 – 3/4 in.

Faceplate Size........................................................................................................................................... 10 in.

Feed Rod Diameter.................................................................................................................................. 3/4 in.

Floor to Center Height......................................................................................................................... 46-1/4 in.

Construction

Base..................................................................................................................................................... Cast Iron

Headstock............................................................................................................................................ Cast Iron

Headstock Gears............................................................................................................ Flame-Hardened Steel

Bed........................................................................................ Induction-Hardened, Precision-Ground Cast Iron

Body..................................................................................................................................................... Cast Iron

Stand............................................................................................................................................. Formed Steel

Paint......................................................................................................................................................... Epoxy

The information contained herein is deemed accurate as of 5/22/2013 and represents our most recent product specifications.

Model G0750G

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.

-8-

PAGE 2 OF 3

Model G0750G (Mfg. Since 11/12)

Table of Contents