Connections - Sharp FO-155 Operation Manual

CONNECTIONS
$ .:"
COnneC~~~~~~n~~~~,~~~
~~~h~
handset
~\ [.,
(
and the fax as shown.
ad
The ends of the handset lead are iden-
Q "-
tical, so they will go into either socket.
..
'1.
Place the handset on the handset rest.
',.. .' ,.> \ ."
,. <.
Use the handset to make ordinary phone
,,
calls, or to transmit and receive documents
manually.
Install the fax machine near an easily ac-
cessible power point 230-240 V, 50Hz
Plug the power lead into a 230-240 V.
o
50 Hz. grounded (3-prong) AC outlet.
,
am
The fax does not have a power onloff
'a
switch, so the power is turned on and
3
off by simply plugging or unplugging
the power lead.
Caution: \Nhen disconnecting the FO-
155 or FO-355, unplug the telephone
line cord before unplugging the power
cord.
Insert the small modular plug which termi-
For
<~
nates the F080TP adaptor line cord into
Australia =., the socket on the back of the fax marked
"TEL. LINE". Plug the F080TP adaptor
into the telephone socket on the wall.
L
For New Zealand
Be sure to plug the line cord into the
TEL. LINEsocketon thefax. Do not
plugit intotheTEL.
SET socket.
Note: If your area experiences a high incidence of lightning orpower surges we
recommend that you install surge protectors for the power and telephone
lines. Surge protectors can be purchased at most telephone specialty stores
1-2
INSTALLATION