Initialsettings; Entering Your Name And Fax Number - Sharp FO-155 Operation Manual

(
ENTERINGYOURNAMEAND FAXNUMBER
)
To have your name and faxitelephone number (called the "Sender's name" and
"Sender's number") printed at the top of eve~ page you transmit, program them by
pressing the panel keys as shown below.
+ If you enter an incorrect number or letter, press the HOLD key to move the
cursor back to the mistake, then enter the correct number or letter. (To move the
cursor fomard, press the SPEAKER key.)
1
'"0°"
m
Press the keys shown at left. "ENTRY
MODE" will appear in the display.
2
mm
Press the "#' key 2 times. "OWN NUM-
BER SET" will appear in the display.
3
START
o
Press the START key
o
(Example)
Enter your fax number (max. of 20 dig-
its) by pressing the number keys, (To in-
sert a space between digits, press the
"#' key. To inseri a "+", press the "*"
key.)
5
START
o
@
Press the START key.
Enter your name by pressing the appro-
priate number keys as shown on the fol-
lowing page. Press each key repeatedly
until the desired letter appears in the dis-
~Ap
am
play. (Max. of 24 characters.)
@
am
(Example: "SHARP")
Press the START key and then the
STOP key.
2-2 INITIAL SETTINGS