Table of Contents
Advertisement
Problem
Check and remedy
Nothing appears in the dis-
.
Make sure the power cord is properly plugged
play.
into a power outlet,
.
Connect another electrical appliance to the
outlet to see if it is live.
The fax does not respond
.
If a beep sound IS not made when you press the
when you
press any of its
keys, unplug the power cord and then plug it
keys.
back in several seconds later.
Automatic document feed-
Check the size and weight of the document (see
ing does not work for trans-
"Transmittable documents" in Chapter 3).
mission or copying.
Dialing cannot be done.
.
Make sure
the power cord is properly plugged
into a power outlet.
Make sure that the telephone line is properly
connected to both the
TEL. LINE jack and the
wall jack,
Make sure that the fax is set to the correct
dialing mode for
your telephone line. See Option
Setting 6 in Chapter 6.
Nothing is printed at the re-
;
Make sure that the document for transmission
is
ceiving end.
placed face down in the feeder.
.
Make sure that the fax paper is properly loaded
in the receiving machine.
The power is on, but no
.
Make sure that the receiving machine has fax
transmission takes place.
~
paper.
.
Make sure that the telephone line cord is
plugged into
the "TEL. LINE" jack, and not the
"TEL. SET" jack.
If the receiving machine is in manual mode with
no attendant, reception will not be possible.
If the receiving machine is not a Sharp model,
make sure it is G3 compatible.
.
Check the display for error messages.
.
Pick up the handset and check for a dial tone,
—
TROUBLESHOOTING
9-1
Advertisement
Table of Contents
