Table of Contents
Advertisement
LOADINGTHE FAXPAPER
Your fax prints by a process called thermal printing. The print head applies heat to
special paper which is chemically treated to change colour when heated to a certain
level, and this creates the printed text or image.
Follow the steps below to load the sample 15 m roll of fax paper provided
1
Grasp the finger hold on the right side of
the paper compartment cover, and pull
up to open It.
Remove the packing paper from the pa-
per compartment.
Caution! If you are replacing the pa-
per, do not touch the metal strip in the
compartment. It may be hot if a docu-
ment has just been printed.
2
Unwrap the roll of fax paper and insert it
in the compartment.
Important: The roll must be placed so
that the leading edge of the paper
feeds from over the top of the roll.
(The paper is only coated on one side
for printing. If the roll is placed upside
down, the paper will come out blank af-
ter printing.)
3
FO-155: Pass the leading edge of the
paper over the roller and through the out-
let in the paper compartment cover. Re-
move any slack.
Q
F-:
Pass the leading edge of the
~;
p
,7
paper through the slit between the metal
paper guide and the protruding ribs, and
,/
,N+<
d
,/
pull it out from the other side of the pa-
,
.=,
per compartment cover. Remove any
'Y
slack.
INSTALLATION
1-5
Advertisement
Table of Contents
