Problems And Solutions - Sharp FO-155 Operation Manual

PROBLEMS AND SOLUTIONS
A distotied image is
Noise on the telephone line may cause
received at the other end, distortion. Try sending the document again.
Make a copy of the document on your fax. If the
copy is also distorted, your fax may have a
problem.
The power is on, but no ~
. Make sure that the telephone line cord is
reception takes place.
plugged into the "TEL. LINE" jack, and not the
"TEL. SET" jack.
The fax paper does not
. The fax paper may be jammed. See "Clearing
come out. jammed fax paper" in this chapter.
The fax paper comes out
. Make sure that the fax paper is properly loaded
blank when you try to
in your
fax. (If the roll has been loaded upside
receive or copy a document.
down, nothing WIIIbe printed.)
For reception, make sure that the document
for
transmission is loaded face down In the feeder
of the transmitting machine,
The received document is
Make
sure that you are using the recommended
faint.
fax paper, See "Loading the Fax Paper" [n
Chapter 1.
Ask the other party to send higher contrast
documents. If the contrast is still too low, your
fax may have a problem. Make a copy to check
it.
I
Received images are I
Noise on the telephone line may cause
distorted,
distortion. Have the other party try sending the
I
document again.
The printing head may be dirty, See "Fax
printing head" in Chapter 8.
. Make a copy of another document on your fax, If
the mpy is also distorted, your fax may have a
problem.
9-2 TROUBLESHOOTING