Table of Contents
Advertisement
.
Use [,]
and [_.] to scroll through
the pre-recorded
images
on the
monitor
screen.
Use [,] and [1_] to scroll through the pre-recorded
images. Each image appears,
along with an indication of the timing when it was pre-recorded.
_
._-_ _
.,-_ _
_-_ _
._-_ SHUTTER
(0.4*)
(0.3*)
(0.2*)
(0.1 *)
(Full-press)
* Seconds prior to full-press of shutter button.
• The timing of the image you select here will be the timing of the image
displayed first in step 4 the next time you perform the above procedure. If you
select the image that was pre-recorded
0.3 seconds prior to full-press of the
shutter button, for example, the -0.3-second
image will be displayed in step 4
the next time you perform the above procedure.
7.
To save the currently displayed image as the final images, press [SET].
_NOTE
• The current mode dial setting is ignored when recording with this BEST SHOT
scene.
• With this BEST SHOT scene, the flash setting automatically
becomes []
(Flash
Off).
• Shooting with this BEST SHOT scene makes the shooting range narrower than
normal.
• The Self-timer cannot be used with this BEST SHOT scene.
• With this BEST SHOT scene, half-pressing
the shutter button fixes focus and
exposure at their current levels.
• With this BEST SHOT scene, image recording will not be successful if you
full-press the shutter button without allowing enough time (at least 0.4 seconds)
after half-pressing
it.
• Pay close attention to the subject when shooting. Failure to do so can cause
considerable
lag from the instant you want to shoot until you actually full-press the
shutter button. This can cause image recording to be too late, even if you use this
function.
• The current "Review" setting (page 100)is ignored when shooting with this
function. Immediately after you full-press the shutter button, one of the five
pre-recorded
images will appear on the display as in step 4 of the above
procedure.
80
Using BEST SHOT
Advertisement
Table of Contents
