Table of Contents
Advertisement
5.
Set the mode dial to .sjj] (High Speed CS).
• This will display []
(High Speed CS).
High Speed CS icon
6.
Press [SET].
7. Use [A]
and [V] to select the third control
panel option from the bottom (High Speed CS
fps).
.
Use [,] and [_.] to select the continuous shutter
(CS) speed you want and then press [SET].
Enables specification
of the number of
CS images recorded per second.
CS speed
9. Use [A]
and [V] to select the second control
panel option from the bottom (Max CS shots).
10. Use [,] and [_.] to select the maximum number of shots for each
continuous shutter operation and then press [SET].
11. Use[A]
and [V] to select the bottom control panel option (Prerecord
CS shots).
12. Use [4]
and [_.] to specify
how many of the 30 images and for how
long images should be pre-recorded
in the buffer.
• Prerecord CS shooting is not performed when the number of buffer images and
the recording time are both zero.
Shutter button full-press
Number of
remaining images
images and pre-record
and remaining recording time
time
after the shutter button full-press
• You can configure the mode so up to 29 images are pre-recorded
to the buffer
until you fully press the shutter button.
60
Snapshot Tutorial
Advertisement
Table of Contents
