Table of Contents
Advertisement
Use the following procedure to view snapshots on the camera's monitor screen.
• For information about how to play back movies, see page 104.
• For information about images recorded using continuous shutter (CS), see page
105.
.
Press [r_q] (PLAY) to enter
the PLAY mode.
• This will display one of the
snapshots currently stored in
memory.
• Information about the
displayed snapshot also is
included (page 12).
[F_I] (PLAY)
You also can clear the information
to view only the snapshot (page 158).
You can zoom in on the image by sliding the zoom controller towards I-,_-] ( page
109). If you are recording a snapshot that is very important to you, it is
recommended
that you zoom the image and check its details after recording it.
.
Use [,]
and [_.] to scroll between
images.
• Holding down either button scrolls at high speed.
[I,9
[i,9
_NOTE
• Half-pressing
the shutter button while in the PLAY mode or while a menu screen is
displayed will switch directly to the REC mode.
29
Quick Start Basics
Advertisement
Table of Contents
