Table of Contents
Advertisement
t
Operation
• Never open the battery cover while the back lamp is flashing green. Doing so can
result in the image you just shot being saved incorrectly, damage to other images
stored in memory, malfunction of the camera, etc.
• If unwanted light is shining directly onto the lens, shade the lens with your hand.
Monitor
Screen when Shooting
Snapshots
• Subject brightness conditions can cause monitor screen response to slow and can
cause digital noise in the monitor screen image.
• The image that appears on the monitor screen is for image composition.
The actual
image will be recorded at the quality set for the image quality setting (page 101).
Shooting
Indoors
under Fluorescent
Lighting
• Minute flickering of fluorescent
lighting can affect the brightness or color of an
image.
Other
Precautions
• Due to the characteristics
of the camera's semiconductor,
slow shutter speeds can
cause digital noise in images. The camera performs an automatic noise reduction
process whenever the shutter speed is 1 second or slower. Storage of images shot
at slower shutter speeds takes longer because of the time required for noise
reduction. Do not perform any key operation while the image storage operation is in
progress.
• A noise reduction process is performed when ISO sensitivity is set to a high value.
This can cause the camera to take relatively longer to be ready to shoot again after
you press the shutter button. Do not perform any key operation while the image
recording operation is in progress.
• Due to the characteristics
of the imaging element used by the camera, very fast
moving objects in an image may appear distorted.
31
Quick Start Basics
Advertisement
Table of Contents
