Table of Contents
Advertisement
iiiiiiiii,,
To use Continuous
Shutter (CS), use
the mode dial to enter the Continuous
Shutter mode.
Flash CS (page 56)
Normal Speed CS (page 57),
_
High Speed CS (page 58)
f/_(
_ )t
This mode will record consecutive images while firing the
flash.
• You can select a CS speed of 1 image, 3 images, or
5 images per second.
• In this mode, you can specify consecutive recording of
three to 10 images. Recording will stop if you release
the shutter button.
1.
Set the mode dial to _ (Flash CS).
2.
Press _uP (Flash
up) to open the flash unit.
3.
Use [A] and [V] to select the third control panel option from
the
bottom
(Flash CS fps).
4.
Use [,]
and [,]
to select the continuous
Flash Unit CS Speeds
shutter
(CS) speed
you want and then press
[SET].
fps (frames per second) is a unit of measurement
indicating the number of images recorded or played back per second.
5.
Use [A] and [V] to select the second
control
panel option from
the
bottom
(Flash CS Images).
6.
Use [,]
and [,]
to select the number
of flash
continuous
shutter (CS) images you want to shoot
and then press [SET].
You can select any one of the following values: 3, 5, 7, or 10.
56
Snapshot Tutorial
Advertisement
Table of Contents
