Table of Contents
Advertisement
• When "[]
Auto WB" is selected for the white balance setting, the camera
automatically determines
the white point of the subject. Certain subject colors
and light source conditions can cause problems when the camera tries to
determine the white point, which makes proper white balance adjustment
impossible. If this happens, select the white balance setting that matches your
shooting conditions
(Daylight, Overcast, etc.).
You can manually adjust an image's exposure value (EV value) before shooting it.
• Exposure Compensation
Range: -2.0 EV to +2.0 EV
• Unit: 1/3EV
1.
In the REC mode, press [A].
2.
Use [A] and [V]
to select the fifth
control panel option from the top (EV
Shift).
3.
Use [,]
and [,]
to adjust the exposure
compensation
value.
[1_] : Increases the EV value. A higher EV
value is best for light-colored
subjects
and backlit subjects.
[,]
: Decreases the EV value. A lower EV
value is best for dark-color subjects
and for shooting outdoors on a clear
day.
.
To cancel exposure compensation,
change
the EV value to 0.0.
Exposure compensation value
Press [SET].
This applies the exposure compensation
value. The exposure compensation
value you set remains in effect until you change it or turn off the camera (which
causes it to revert to "0.0").
_NOTE
• When shooting under very dark or very bright conditions, you may not be able to
obtain satisfactory
results even after performing exposure compensation.
• EV shift is disabled while the "High Speed Lighting" BEST SHOT scene is being
use.
44
Snapshot Tutorial
Advertisement
Table of Contents
