Table of Contents
Advertisement
The following procedure explains how to record a
standard (STD) movie.
See the pages indicated below for more information
about movies.
High-definition
movie (HD movie): page 67
High speed movie (HS movie): page 68
Shutter button
Mode dial
1.
Set the mode dial to @ (HD/STD).
2.
Press [A].
3.
Use [A] and [V] to select the second
control panel option from the top
(HD/STD
switching).
4.
Use [,]
and [k.] to select "STD"
(Standard),
and then press [SET].
• Recording is performed with an aspect ratio of 4:3, an image size of 640X480
pixels, and a frame rate of 30 frames per second (STD Movie). Image size
setting cannot be changed.
5.
Remaining recording time
Press the shutter button.
This will start recording and display _
on the
monitor screen.
Movie recording includes monaural audio.
.
Press the shutter button again to stop
recording.
• The maximum file size allowed for a single movie
file is 4GB. Movie recording stops automatically
when the file size becomes 4GB.
Recording
time
Minimizing
the Effects of Camera Movement
during Movie Recording
You can configure the camera to minimize the effects of camera movement during
HD and STD movie recording (page 95). Note, however, that this does not prevent
image blur due to subject movement.
65
Recording Movies
Advertisement
Table of Contents
