You can adjust white balance to match the source of light available where you are
shooting and avoid the blue cast that results when shooting outdoors when it is
cloudy, and the green cast that results when shooting under fluorescent
lighting.
1.
In the REC mode, press [A].
2.
Use [A] and [V] to select the fourth
control panel option from the top
(White
Balance).
3.
Use [,]
and [_.] to select the shooting
condition
you want and then
press [SET].
0onfigures
the c amera
to adjust
white
ba,ance
automatica,y
For shooting
outdoors
on ac,earday
For shooting outdoors on an overcast rainy day, in the shade,
etc.
For shooting on a clear day in the shade of trees or buildings
For shooting under white or day white fluorescent
lighting
For shooting under daylight fluorescent
lighting
For shooting under light bulb lighting
For configuring the camera manually to suit a particular light
source
QSelect
"[]
Manual WB".
_)Under
the lighting conditions you plan
to use when shooting, point the camera
at a blank white piece of paper so it fills
the entire monitor screen and then
press the shutter button.
(_) Press [SET].
The white balance setting is retained even if you turn off the
camera.
Blank white paper
43
Snapshot Tutorial