Replacing Pvdm2 Modules In The Voice Feature Card - Cisco AS5400XM - Universal Gateway Voice High-Density Easy Order Bundle Installation Manual

Replacing PVDM2 Modules in the Voice Feature Card

Figure 6-11
Figure 6-12
Check the OK/MAINT LED to verify that the card is working properly. For information about the voice
Step 6
feature card LED, see the
Note
Replacing PVDM2 Modules in the Voice Feature Card
The voice feature card contains six 80-pin SIMM sockets for PVDM2 modules, numbered 0 through 5.
(See
The voice feature card supports a 64-channel PVDM2 (AS5X-PVDM2-64) module.
Note
Cisco AS5350XM and Cisco AS5400XM Universal Gateways Card Installation Guide
6-8
Tightening the Captive Screws on the Cisco AS5350XM Universal Gateway
DFC
Captive
screw
Captive
screw
Tightening the Captive Screws on the Cisco AS5400XM Universal Gateway
Captive
Captive
screw
screw
"LEDs" section on page
To use the voice feature card, at least one voice feature card must be present when the universal
gateway is powered on. More voice feature cards can be inserted later. See the
the Voice Feature Card" section on page 6-2
Figure 6-13.) Each socket can be filled with a single 80-pin PVDM2 module.
Carrier card
7-1.
for more information.
Chapter 6 Voice Feature Card
Chassis
"Restrictions for
78-17406-01