Installing A Sim Card - Cisco IG21 Series Installation Manual

Installing a SIM Card

•
Installing a SIM Card
IG21, IG21R, and IG31R gateways use a SIM card for zero touch provisioning (ZTP) and configuring access
to a carrier.
A gateway has two SIM card slots. You install a SIM card in either slot
To install a SIM card in a gateway, follow these steps:
1. Remove the SIM slots and Reset button cover screw on the side panel (IG21) or the rear panel (IG21R
and IG31R), as shown in
page 32
Shown), on page
Cisco IG21 IoT Gateways, Cisco IG21R Rugged IoT Gateways, and Cisco IG31R Rugged IoT Gateways Hardware Installation Guide
Installing a SIM Card, on page 31
Figure 22: Unscrewing the SIM Slots and Reset Button Cover on the IG21, on
or Figure 23: Unscrewing the SIM Slots and Reset Button Cover on the IG21R or IG31R (IG31R
32.
5
C H A P T E R
31