T1 and E1 Feature Cards
This chapter provides procedures for installing and removing the T1 and E1 feature cards and includes
the following sections:
•
•
•
•
•
Overview
You can install a T1 or E1 feature card in any feature card slot of the universal gateway chassis. (See
Figure 3-1
Figure 3-1
Figure 3-2
78-17406-01
Overview, page 3-1
Online Installation and Removal of the T1 or E1 Feature Card, page 3-2
Configuring Input Impedance for the E1 Feature Card, page 3-11
Getting Help, page 3-12
Where to Go Next, page 3-12
through
Figure
3-3.)
2-Port T1 or E1 Feature Card
Bantam ports
T1 or E1 ports
0
1
Rx
4-Port T1 or E1 Feature Card
Bantam ports
T1 or E1 ports
0
1
2
3
Rx
Cisco AS5350XM and Cisco AS5400XM Universal Gateways Card Installation Guide
2 PRI
Tx
ACT
OK
4 PRI
Tx
ACT
OK/
MAIN T
C H A P T E R
3
3-1