Casio DT-800RF Supported Equipment Manual page 50

Error Message Resolution Guide
Message
REMOVE FROM CRADLE;
ACQUIRING CRADLE BUS;
Printer Out\nOf Range;
Connection Refused\nBy Host;
Connection Timed Out;
Connection Failed\nHost Not
Responding;
Connection Failed\nHost Unreachable; Could not connect to the Host.
Mobile Unit Out\nOf Range,
Unable\nTo Transmit;
4-10
Reason
Remove Mobile Unit from the
cradle.
Attempting to access the cradle
through the serial port you have
configured.
Printer out of the coverage area.
You connected to the target host
but the host disconnected you.
You connected to the host but did
not logon in the appropriate time so
the host disconnected you.
Could not connect to the Host.
Mobile Unit out of the coverage
area.
Solution
Advisory message.
Advisory message.
Most likely a range, access point or radio
issue. Troubleshoot the customer's
environment.
Verify that the configuration file has the
correct Mobile Unit type and New
environment variable set. Fallback to the
Connect Default to verify the connection.
Modify the Host parameters for login.
Most likely a range, access point, radio,
host or network issue. Troubleshoot the
customer's environment.
Most likely a range, access point, radio,
host or network issue. Troubleshoot the
customer's environment.
Most likely a range, access point, radio,
host or network issue. Troubleshoot the
customer's environment.
Supported Equipment Manual
Reference Tech Note
---
---
T1113, T1114, T1161,
T1171, T1187 and
T1194
---
---
T1113, T1114, T1161,
T1171, T1187 and
T1194
T1113, T1114, T1161,
T1171, T1187 and
T1194
T1113, T1114, T1161,
T1171, T1187 and
T1194
• March, 2006