Quick Start; Configuring The Manager - Casio DT-800RF Supported Equipment Manual

Quick Start

Quick Start describes how to prepare the Twin Client Manager and the Casio terminal for
a Telnet session with the host. Following an initial serial download, the terminal software
and configuration is managed automatically, over the wireless network.

Configuring the Manager

The first step is to configure the Twin Client Manager to meet site-specific requirements,
and then prepare it for the automatic management of the terminal software and IP
addresses. This simple procedure will require only a few minutes to complete.
Setting the Emulation
Click on
menu, as shown below.
Click on
Setting the Servers
The Servers are the Telnet host systems the terminals will access.
Supported Equipment Manual
, ,
Start Programs PowerNet
, select the desired emulation, and click on
Emulation
•
March, 2006
,
and Twin Client Manager
Quick Start
. Select the
Settings
.
OK
2-5