Casio DT-800RF Supported Equipment Manual page 34

Terminal Setup
Any group can be made the default group by clicking on the group, and then clicking on
the right mouse button. Then click on the
Reassigning Terminals
After a terminal has been configured and assigned to the default group, it can be
reassigned to a new group by clicking on the terminal icon as shown below.
Then, holding the mouse button down, drag the terminal icon to the desired group as
shown next.
Release the mouse button, which reassigns the terminal.
The next time the terminal is rebooted, it will be reconfigured as defined in the group
specification.
2-26
option.
Make Default
Supported Equipment Manual
• March, 2006