Casio DT-800RF Supported Equipment Manual page 14

Terminal Setup
To set these addresses from the
Enter the name of each server, its IP Address and IP port (normally 23 for Telnet
servers), and emulation type. Then click on
Repeat this step for each telnet server the terminals are required to access. If an error is
made in the name, IP Address, IP Port number, or Terminal emulation type, click on the
line that is in error and then click on the
Setting Terminal Model and COM Port
The default terminal model is
cradle is through
change the
The default terminal model,
under PowerNet. To maintain compatibility with existing Casio Telnet client keyboard
layouts, a specific terminal model and keypad must be selected from the Terminal Model
window.
2-6
Settings
DT800
. To select a specific Casio terminal model and keypad, or to
COM1
port assignment, click on the
COM
DT800
menu, click on
Servers
.
OK
button to make the corrections.
Edit
, and the default serial connection to the Casio
menu as shown.
Options
, represents the default setup for all Casio terminals
Supported Equipment Manual
and then click on .
Add
• March, 2006