Table of Contents
Advertisement
Terminal Setup
Printer Type
This scrolling list selects the attached printer type. The default value is
no printer is attached.
Terminal Setup Using Twin Client Menus
The Twin Client terminal software provides an internal menu system for configuring
certain parameters on the terminal and for switching between "server" and "telnet" mode
of operation. To access this menu system, press the uppercase
shown in the following figure.
Twin Client
© 1991-2006, Connect, Inc.
Keypress to Continue
The next screen displays the menu options. Cursor to the appropriate option and press
.
Enter
Edit Menu Options
Edit Mobile Unit IP
Edit Server/Host IPs
Edit License Key
Run Site Survey
Switch Client Modes
Run Client Emulator
Exit to OS
Use the
the highlighted option. Each menu option is described below.
Edit Mobile Unit IP
The IP list contains the terminal IP address, the Subnet mask, and the Router IP address.
Enter the appropriate address and select
IP 206.232.71.38
SN 255.255.255.0
RT 206.232.71.1
<F3> Save <F7> Quit
Press
F3
Edit Server/Host IPs
If you wish to change the host IP address or addresses using the terminal menus, select
this option and enter up to four Host IP addresses as required.
2-18
and
Up-Arrow
Down-Arrow
to save the configurations.
keys to navigate the menu, and press
to save and/or
F3
F7
Supported Equipment Manual
, indicating
none
at the startup screen as
C
to select
Enter
to quit.
• March, 2006
Advertisement
Table of Contents
