Guest Access Show - NETGEAR WMS5316 - ProSafe 16-AP Wireless Management System Reference Manual

ProSafe 16 AP Wireless Management System WMS5316 Reference Manual
1. On the Configuration tab, select Guest Access > Config:
Figure 4-8
2. Specify the following settings:
– Enable Guest Access: Enable this if you want all HTTP (TCP, port 80) requests to be
routed to the URL you specify in the next field.
– Redirect Location: Specify Local to redirect to a redirect page on the WMS5316. You
can specify External and enter a URL for redirecting all HTTP (TCP, port 80) requests.
– URL: Enter the URL of the Web server that you want all HTTP requests to be redirected
to. Welcome Page.
– Select Image File: Specify a jpeg/gif image to upload to the Wireless Management
System. This image is set as background for default Wireless Management System
redirection page; which is displayed when client connects to an access point with guest
access enabled.
– Preview: Use this button to display how the redirection page will look.
3. Click Apply so that your changes take effect.

Guest Access Show

When Guest Access is configured it redirects the first HTTP (TCP, port 80) request to the default
guest access page. The last 512 IP access and entered email address are recorded. This page
displays the collected information.
4-11
v1.0, March 2010
Security Configuration