Time Settings - NETGEAR WMS5316 - ProSafe 16-AP Wireless Management System Reference Manual

ProSafe 16 AP Wireless Management System WMS5316 Reference Manual

Time Settings

On the Configuration tab, select System > Basic > Time Settings:
Figure 1-3
This page lets you configure the time-related settings of your Wireless Management System and
managed access points. It has the following options:
• Time Zone: Select the local time zone for your region or country.
• Current time: The current time at your location.
• NTP Client: Enable this to use a Network Time Protocol (NTP) server to synchronize the
clock of the Wireless Management System and managed access points. Disable this option if
you do not want to use an NTP server.
• Use Custom NTP Server: Select this check box if you wish to use an alternate NTP Server.
By default, the NETGEAR NTP server is used by the access point.
• Hostname / IP Address: Provide the host name or IP address of the NTP server, if you are
using a custom NTP server.
1-4
v1.0, March 2010
Getting Started