Load Balancing For Managed Access Points - NETGEAR WMS5316 - ProSafe 16-AP Wireless Management System Reference Manual

ProSafe 16 AP Wireless Management System WMS5316 Reference Manual

Load Balancing for Managed Access Points

On the Configuration tab select Wireless > Basic > Load Balancing.
Figure 3-5
• Apply to all groups checkbox: Select this checkbox to apply the settings to all managed
access points regardless of group.
• Enable Load Balancing: Allow the Wireless Management System to distribute access point
clients equally among access points.
• Max Clients Per Access Point: The maximum number of wireless clients that can connect to
an access point at one time. You can select MAX to allow the maximum supported by the
access point.
• Max Clients Per Radio: The maximum number of wireless clients that can connect to each
radio of the access point at one time. You can select MAX to allow the maximum supported by
the access point.
3-8
v1.0, March 2010
Wireless Configuration