Ip Settings - NETGEAR WMS5316 - ProSafe 16-AP Wireless Management System Reference Manual

ProSafe 16 AP Wireless Management System WMS5316 Reference Manual

IP Settings

On the Configuration tab select System > IP Settings:
Figure 1-4
This page lets you to configure the management IP address setting of the Wireless Management
System. It has the following options:
• IP Address: This is the IP address of the Wireless Management System. The default IP
address is 192.168.0.250. To change it, enter an available IP address from the address range
used on your LAN.
• IP Subnet Mask: Enter the subnet mask value used on your LAN. The default value is
255.255.255.0.
• Default Gateway: Enter the IP address of the gateway for your LAN.
• Primary DNS Server: Enter the IP address of the primary domain name server (DNS) that
you want to use.
• Secondary DNS Server: Enter the IP address of the secondary DNS that you want to use.
Getting Started
v1.0, March 2010
1-5