Dhcp Leases; Monitoring Rogue Access Points - NETGEAR WMS5316 - ProSafe 16-AP Wireless Management System Reference Manual

ProSafe 16 AP Wireless Management System WMS5316 Reference Manual
Use the Refresh button to update connectivity status.
Use the Apply button to save the location of the access points on the floor displayed floor map.

DHCP Leases

The DHCP Lease screen displays current DHCP clients which have been allocated IP addresses.
On the Monitoring tab select Summary > Advanced:
Figure 5-8
This section displays information about the DHCP lease provided by DHCP server on the Wireless
Management System.
• Host Name: The host name of the client, if possible to determine.
• IP: The IP address allocated to the DHCP client by the Wireless Management System.
• End Time: The DHCP lease end time for the DHCP client.
• End Date: The DHCP lease end date for the DHCP client.
• MAC: The Ethernet MAC address of the DHCP client.
• VLAN: The VLAN the client is using to connect.
Use the Refresh button to update client DHCP Lease display.

Monitoring Rogue Access Points

On the Monitoring tab select Rogue Access Points. You can view rogue or unknown access points.
Monitoring
v1.0, March 2010
5-9